Picking Out Your Wood - What You Should Know?


The two basic categories of wood are hardwood and softwood. There is also manufactured wood like plywood.

What you use for any given project depends on various factors: strength, hardness, grain characteristics, cost,stability, weight, color, durability and availability. Usually beginning woodworkers start out with softwood such as pine. It's soft and easy to work, and you don't need expensive tools to get good results. It is readily available at local lumberyards and home centers. It has it's limitations in furniture making; it is a soft wood and will damage easily.

Softwood is from an evergreen or coniferous (conebearing) tree. Common varieties are pine, fir, spruce,hemlock, cedar and redwood. These woods are mostly used in the home construction industry. Cedar and redwood are excellent choices for outdoor projects, while pine is often used for "Early American Country Style" furniture. Pine and most other softwoods will absorb and lose moisture more than hardwoods so are not as stable.Purchase the lumber at least two weeks before starting your project and keep it indoors.

You will find that softwoods are sold in standard thickness and widths, for example a 1 X 4 will be 3/4" thick and 3 1/2" wide similar to construction materials. The material will usually be priced per lineal foot and the price will increase accordingly for the wider boards.

Hardwood lumber comes from deciduous trees, the ones that shed their leaves annually. Popular domestic species are oak, maple, cherry, birch, walnut, ash and poplar. Of these common native hardwoods, only red oak and poplar are usually stocked in home centers and lumberyards, the others have to be obtained from specialty stores. The material stocked at home centers and lumberyards is usually sold in similar dimensions to softwood and by the lineal foot as well.

At specialty stores the thickness of hardwood lumber is specified in quarters of an inch, measured when the wood is in a rough state. The thinnest stock is 4/4, representing 1 in., and the thickest usually available is 16/4, representing 4in. Rather than being milled to specified dimensions, like pine, hardwoods are sold in random widths and lengths.Working with hardwoods is quite different from working with pine; you cannot drive a screw through hardwood
lumber without first boring a pilot hole. Cutting and planing hardwoods requires extremely sharp tools.

Hardwoods are good to use when building furniture.Oak and ash are known as open-grain woods. These species have alternating areas of relatively porous and dense wood,when stained the open-grain areas absorb the color readily while the harder areas are more resistant. This accentuates the grain patterns, creating a dramatic effect.

Cherry, maple and birch are closed-grain woods,demonstrating a more uniform texture throughout a board.Poplar is also a closed-grain wood, but its color ranges from a beige to olive green, and often has purple highlights thrown into the mix. Because of this unusual coloration, it is rarely used if a furniture piece is going to have a clear finish.This wood is best when stained or even painted. Poplar,being less expensive, is also a good choice for framing
hardwood projects.

Hardwood is more durable and less prone to dents and scratches. It is also more expensive but will finish to a better advantage. Soft woods, like pine, are more prone to dents and scratches and do not have the durability of hardwood.

Softwoods are much less expensive and easier to find. Ask your lumber supplier to show you "Class 1" or "Select Grade" lumber. Make sure it is properly dried, straight, and free of knots and defects. (It may be impossible to be completely free of defects but be sure you understand how to cut around these.)

The two most common manufactured sheets goods used in furniture making are MDF (Medium Density Fiberboard) and Particle Board. Both are made from wood particles, combined with glue and bonded under pressure.MDF has finer particles than Particle Board so produces a smoother and stronger finished product.

MDF machines very well and is often used for moulded components on painted furniture. Its main draw back is that it is a very heavy product compared to real wood.

Because of their laminated construction, they are extremely stable in all dimensions. Since the veneers on any given panel are usually cut sequentially from the same log,the panel should display a uniform color and grain. Matching the grain pattern of solid wood to the generally uniform grain pattern on the panels can be difficult. But careful planning can yield good matches in the most visible areas of your project.

Manufactured sheets do have limitations, whenever they are used, regardless of the core, the edge must be hidden and the veneers on the surface are extremely thin,often less than 1/32 in. Because of this, the surface is fragile
and has a tendency to split out, especially on the back side of a saw cut. Also, since the veneer is so thin aggressive sanding can quickly work through the veneer and expose the unattractive core underneath.

As we said, what wood you use depends on what kind of project you are undertaking. For projects that will be painted, you can use simply MVF. For furniture, it’s often a good idea to choose something that will finish well like cedar or oak.

You’ll most likely be getting your wood from a lumber supply store or a home improvement store like Home Depot or Lowe’s. There are a few things you need to keep in mind when picking out your lumber.

At the lumber yard or store, you'll find wood boards stacked up in high piles according to length, quality grade,thickness, wood type and many other categories. Even in piles of boards that are grouped as being the same, there
are differences in quality, so follow these simple tips for choosing boards that will work for your woodworking projects.

Don't take boards you don't want! Lumberyard novices may feel like they have to take the boards that are first presented to them. Don't be afraid to examine each board closely and send boards back if they don't meet your criteria. Why pay for a warped board that won't work in your current project? Rejecting boards is not an insult, but a way to pay for wood you can use, so get in the habit early.

Check for straightness. Hold the board at eye level on one end, with the other end on the ground. Look down the board to see if it has obvious curves or twists. Some projects can handle a curved board, but for beginners,working with curved boards may be too complicated.

Check for splits and warping. Look over both sides of the board to see if there are any long splits or warped edges. Splits and warps reduce the amount of wood you can use for your project, so pass on boards that would result in a
lot of waste.

Knotholes can be considered attractive in some kinds of woodworking projects, so if you're looking for a really knotty piece of wood, that's fine. Otherwise, check your boards for large knotholes that would become waste wood or loose
knot pieces that may fall out, causing gaps or weak areas in your cut pieces.

For fine woodworking projects or projects that need a straight, even grain, quarter sawn lumber offers even wood graining, but is more expensive than regular plain sawn lumber. Decide whether you're willing to pay for the straight grain before choosing boards.

Look closely at each board to see if the color is even enough for your project, and that there are not a large number of wormholes or other marred areas. Also check for lumberyard chalk or pen markings or dents that may not come off easily.

Used boards gathered from old barns or other projects can be interesting and fun to work with. However, when buying or choosing reclaimed lumber, check for signs of decay. If the board is spongy or soft, or has signs of fungus on it, it may not hold up well as project wood.

Pressure-treated lumber and chemically treated lumber are for use in outdoor projects, and are better able to withstand temperature and moisture changes. If you're building a deck or outdoor project, ask for treated lumber. Otherwise, untreated boards are a better choice.

The beginning woodworker should probably start out using softer woods like pine or spruce. They are easier to work, and you can eventually move up to harder woods like oak and cedar.

You’re almost ready to get started, but first let’s review some safety procedures all good woodworkers adhere to.

Common Mistakes.. (That You Should Know!)



The single most common mistake in any do it yourself project is the failure to read and follow the manufacturer's instructions for any tool or material being used. Other common mistakes include taking the safety measures that are laid out for a project for granted and poor project planning. Here is a list of hints to successfully complete this project and to do it safely.

Follow the "Golden Rule" of measuring: "Measure twice, cut once." And provide yourself plenty of time for each step.

Understand your plan. Whether it’s a pre-made plan you purchased or downloaded, be sure you know the steps you have to take to finish the project. Don’t be too stringent, however. Be willing to alter your plans if needed to finish the piece in a way that’s easiest for you.
 
Do not neglect your tools and machinery. Make sure you take care of them with cleaning and maintenance on a regular basis. Ensure that metal surfaces are free of rust and blades are kept sharp.

Use a sharp pencil or marking knife to make layout marks on your wood. You must be able to see your markings in order to complete the piece correctly.

Use the same tape measure throughout your whole project. Unfortunately, tape measures aren’t manufactured to be precision measuring devices. The hook on the end slides to compensate for its own thickness when changing between hooking it on the outside of something being measured and pushing it against the interior of something for an interior measurement. Avoid using the hook on the end. Try to start at the one inch mark, but remember to
subtract that extra inch for the correct measurement.

The second and most important thing is to use the same tape measure for every measurement in the project. This will cancel out the variations between tapes. And if you do use the hook, use it for ALL the measurements.

Don’t cut all the parts out at once and expect to have an assembling party with the pieces. This is a common newbie mistake and should be avoided. Why? The first reason is that there could be mistakes in the pattern or plan. If you cut out all of the parts first, and there is more than one mistake, you will have several good quality bits of firewood at your disposal for winter! It is better to do things in stages and learn that the plan is riddled with mistakes
first.

The second problem is with wood movement. Changes in humidity and temperature can cause the wood to warp after being cut. This will affect all of your joinery. The best way to counteract this is to break the project down into
stages.

Your Woodworking Workspace - (Very Important)


The first thing you need to consider is where you’ll be crafting your projects. Most people take up woodworking in their garage or basement. This is fine; just remember that you’ll need some space to store materials and the finished product. You’ll want a space that is easy to move around in and that you can keep organized.

If you’re using power tools, you’ll need easily accessible power outlets. Remember that power tools can be quite noisy, so take into consideration the comfort of your family and your neighbors.

You’ll need a workbench which doesn’t necessarily have to be elaborate. It’s a space for you to work on and keep your plans out in the open.

You can buy commercially made workbenches at most home supply stores. When choosing a workbench, look for one with a wood top, or another smooth, non-marking top, so that the surface doesn’t scuff the wood you use for your projects. Storage underneath the bench is nice if your budget allows a model with built-in drawers and cabinets.

Choose a workbench that fits comfortably in your shop space and that matches the types of projects you think you’ll be working on. A small workbench will do for crafting toys, but you’ll need a larger space if you’re making armoires.But you’re getting started with woodworking as a hobby. Why not make your own workbench? This will give you valuable experience and will become one of the most useful items in your shop! We’ve included a simple workbench plan in this book. Try diving right in with and
start your workshop out with a piece you made yourself!  

It’s a good idea to have a bin where you can place operating manuals from your tools. This way, you won’t lose them and they’ll be easily accessible.

We also recommend a good tool box to store your tools and a box such as a tackle box to sore nails, screws, etc. in. As with most any projects, the better organized you are, the more efficient you’ll be. You’ll also save yourself a lot of stress by being able to locate what you need easily.Some people like to have a peg board over their workbench to hang their tools on. This is a good idea as is to have a bulletin board so you can hang the plans for your current project.

Last, you’ll need good lighting. You can get shop lights inexpensively at discount stores like Wal-Mart or Home Depot.

Now that you have a place to work, what do you need to get started? The obvious answer would be wood, which we’ll talk about a little later. What’s the second obvious answer? Tools!

What You Should Know About Wood Joints


You can have a more finished and professional look to your work by using joints instead of screws and nails. Here are some of the basic joints used in woodworking.

Butt Joints
The butt joint is the simplest of the woodworking joints, and is very easy for beginners to master. The joint consists of two board ends that are pushed, or butted, together and held with nails, screws or glue. Simple wood boxes are often constructed with butt joints. While the butt joint offers a quick finish, it does not offer structural strength in most cases. If a butt joint held together with nails is required to bear much weight, the nails may soon pull out of the wood.

For beginners, though, the butt joint offers an easy way to complete a project without expensive equipment or in-depth woodworking knowledge.

Dowel Joints
This technique is ideal for joining two flat pieces together to form a larger flat surface.Take two pieces of equal length wood. Decide now which side will be the top and which the bottom for each piece and mark the top side of each so that you do not forget.

Clamp both pieces together, one on top of the other, with the bottoms face to face in the middle. When clamping, ensure that the two surfaces along which you plan to join these pieces of wood are level with each other (see diagram
one).

Draw a line down the middle of each surface to be joined. This must be exactly the same on both pieces of wood, otherwise when they are joined there will be a step at the join. Once this line has been drawn, use a set square and mark lines across the grain of the wood. The intersection of the length and width lines will show where the dowel holes will be drawn.

There is no hard and fast rule for how many dowels should be used. However, the heavier the weight of whatever will be on the surface, the more dowels should be used. Typically, one dowel per foot is a good rule (with a minimum of two).

Once these lines have been drawn you can then proceed to drill the holes at the marked intersections. The drill bit used should match the diameter of the dowel being used, thus ensuring a tight fit.

As for the dowel itself, you can either make your own small dowels from a longer length, or you can buy dowel made specifically for this reason. The latter option is a far better solution, as the small dowels are beveled at the ends to make it easier to but them in the holes, and are ribbed to allow the glue to bond more efficiently. Each hole should be just over half as deep as the length of the dowel being used. Once the holes have been drilled, glue one end of each dowel into the holes in the first piece of wood. Then place
glue along the full length of the second piece, ensuring that some glue falls into each of the holes.

Unclamp the two pieces and push them together, ensuring that the two top markings are facing up. Once done you should clamp tightly overnight. Be careful when you clamp them to make sure that both pieces remain flat and
do not try and warp upwards. To avoid this, it may be necessary to clamp the entire piece down to a flat surface.

Dovetail Joints
The dovetail joint is possibly the best joint that you can use to join two pieces of wood together at a right angle. Not only is it a very strong joint, but it also adds to the appeal of the woodworking project.

The simplest way to create dovetail joints is to use a router and a dovetail template jig. The latter is available from any good home improvement store and can cost as little as $70. It's well worth the investment if you plan on doing many dovetail joints in the future.

Arrange the three pieces of the drawer or box as shown in the first diagram and mark the inside and outside of each piece. In addition, mark the ends of each piece as it is imperative that when cutting the dovetails the correct two
ends are cut at one go.

Clamp the front of the drawer and one side into the dovetail machine as follows: the left side of the drawer should be clamped under the front clamp (pointing upwards towards the template) with the inside of the drawer pointing out; the front of the drawer - again with the inside pointing out -should be clamped under the top clamp so that it butts up against the left drawer.

These two pieces should be staggered slightly, rather than being aligned exactly. The precise measurement will depend upon the particular dovetail machine that you are using, and this distance will be supplied with its manual. However, it should be roughly in the region of 7/16 inch. Once everything is tightly clamped in place, use the router to cut around the template, following the direction of the arrows in this diagram.

You can then join the boards together at the joints securing with glue and clamping overnight. It is well worth practicing with scrap wood before trying the above procedure on any project as it will take a while to get the exact measurements (such as the depth of the router cut) perfect.

If the joint is too loose, slightly increase the depth of the router cut. If the joint is too tight (remember that you still have to squeeze some glue into the joint), slightly decrease the depth of the cut.

Slotted Tenon Joints
Slotted tenon joints are typically used as a method of fixing shelving into a unit's shelf walls. However, it can also be used for a number of other purposes. The idea of a slotted tenon joint is that only one of the two pieces of wood needs to be modified in order to attain a good, tight fit. To do this, one piece has a slot made into it that is the same width as the thickness of the second piece of wood. This latter piece of wood can then be pushed into the groove, making a strong, right-angled join.

The most effective way of creating the groove (or slot) is to use a router. Although a chisel can be used, the quality of finish will not be the same (and it takes far longer to make).

Be careful when making the slot to ensure that it is not too wide, otherwise the joint will not be tight enough to work. It is far better to start with too tight a groove and then widen it.

A router is not always the best tool to use however. If the groove is to hold a piece of 1/4 inch (or smaller) plywood, you should use a circular saw instead, changing the depth of cut to as little as 1/4 inch. This smaller cut is ideal when making the joint for a back panel of a cabinet, such as a bedside cabinet.

Now that you have some basic information, let’s get started with that first project!

Who Else Wants a Great Woodworking Tools

If you plan to make woodworking a hobby for a long time, you’re better off buying good tools instead of the cheaper one. They’ll hold up better and last longer.

As far as hand tools, you’ll be fine buying used older ones as long as they’re in good condition. The quality of older tools tends to be better and they’re made to last.You can build quality projects with just hand tools, but power tools make the job so much easier. Be especially leery of buying used or discounted power tools. Make sure they are safe and work effectively.

You don’t have to rush out and buy everything all at once. This is a hobby that can earn you money which can be used to buy tools and material, it may even turn into a livelihood if you are not careful!

When you get the word out to friends and family members that you are delving into woodworking, a lot of them may have excess tools lying around that you can use.Reward any kindness with a beautiful piece once you get
started!

Following are the basic tools you’ll need.

Claw hammers are the most common types of hammers used for woodworking and general repairs around the home.They are available with different types of handles, wood,steel with rubber or plastic grips and fiberglass composition.

The style of hammer you select should be a personal decision, hold the hammer in your hand as if to strike a nail,it should feel balanced, the grip should be comfortable.There are different weights, 16 ounces is a good general purpose choice, for heavier work perhaps 20 ounces. Smaller weights are suitable for tacks and light work or children.

Screwdrivers are needed for almost every woodworking project. Make sure you have various sizes of both Phillips head and flat head screwdrivers. I’m especially partial to my cordless, electric screwdriver that comes with different
size bits for all types of projects. This way, I have one tool with all the versatility of 10!

Wood chisels range in size from 1/4" to 2" wide in 1/8" graduations. They are available with wooden or plastic handles. Use a chisel about one half the width of the cut to be made. Thin cuts can be made by pushing by hand; heavier cuts are made by tapping on the end with a wooden mallet. You’ll want a couple of different sizes of chisels – no need to buy all sizes when you’re just starting out! Levels are available in many sizes and shapes, the most common being 24" long. They can be made of wood, aluminum or plastic. Some have fixed vials, others are adjustable. All levels have one or more vials for vertical and horizontal use, some have 45 degree vials. Inside the vial is
a fluid with an air bubble, when the bubble is centered between the two indicator lines the surface is level. You’ll need a level to insure your project turns out straight. You don’t want to build a bookshelf only to see it listing at a 45 degree angle!

Framing Squares are important in woodworking. With this tool it is possible to layout and measure just about everything in the construction of a house from the basement stairs on up to the attic rafters. It may also be referred to as a steel square or a carpenter’s square. The most common size has a 24" blade and a 16" tongue, however there are smaller sizes available but like some cheaper versions of the larger style they do not have the framing tables stamped on them.

Try Square - These squares have a steel tongue fixed into a wooden handle, they range in size from 3" to 12", some have inch scales on them others are blank. They are very handy for furniture and cabinet making as they are small
enough to fit in confined spaces.

Triangles - These are available in many shapes and sizes in various materials, the double 45° and a 30° - 60° are the two shapes used most in laying out patterns.

Tape measures come in a variety of widths and lengths. I would not recommend anything less than 3/4" wide for a tape over 6 feet long as they can not be extended out and remain rigid. For small projects in the shop 1/2" wide ones are adequate. Some have highlighted indicators at each foot; others have them at 16 inch intervals which is handier in construction for stud layout, whereas the foot indicators are more useful in the shop. Special tapes are available for lefties as well as ones with digital read-outs. The hook on the end is meant to be loose so that it will give an accurate measurement whether it is hooked over the edge or butted up to an edge. Check if the hook has been bent if measurements are not accurate.

Nail and Screws – you can buy these as needed for various projects, but you should still keep on hand various sizes of nails and screws.

Sandpaper – You’ll use a lot of sandpaper in finishing your projects. Have various grades available for the different projects you’ll be completing. Fine grit paper is used for most wood projects. Medium is generally used for first
sanding of soft woods and shaping. Coarse grit should be used for paint removal, rough sanding, and shaping.

Various Saws – A fret saw use very narrow blades so intricate designs can be cut. The blade can be rotated a full 360° to negotiate tight corners. Inside cuts are started by drilling a small hole to allow the blade to pass through it.
Then the blade is inserted into the saw frame. Deep throated saws called scroll saws with frames having 18" clearance are available. Handsaws are available in many sizes and configurations; a good general purpose saw is 26" long and has 8 teeth per inch. Crosscut saws (to cut across the grain) have teeth with a negative rake; ripping saws (to cut in the direction of the grain) have a zero rake.

Hand Plane - There are many different styles of hand planes some made of steel, others made from wood. Most are meant to smooth the surface, there are some with blades designed to cut profiles but with the advent of the router these are less common. Squaring up board edges and cleaning up rough boards is easy work with a hand plane. While you only need a basic smoothing plane to tackle most projects, don’t buy the cheapest hand plane you find. Look for a brand name or at least good quality metal to be sure the plane will last a long time.

Clamps - Any project that is glued requires clamping to insure that the parts are bonded firmly in exactly the right position. You can never have too many clamps, it is a good idea to pick up any that are available for a good price, especially at swap meets and garage sales no matter what style they are.

You’ll use clamps to glue boards side to side and to hold projects together as joints dry. Buying pipe clamps that range from 18 inches to 8 feet wide should ensure you have the right clamp for most projects. Add a few hand clamps and small C-clamps for smaller projects, too. If you intend to work with oak a lot, consider buying pipe clamps with zinccoated pipes to prevent staining of the wood.

Vises – A vise holds wood pieces steady on the workbench as you shape them with other tools. A mid-size vise, with a 7- to 9-inch opening, is sufficient for a beginner. Look for a vise with wood jaws or inserts, or use smooth scrap wood to keep the vise from denting your projects.

Rasps - Rough metal rasps are used to file board edges and remove small amounts of wood. Two rasps, one fine and one coarse, should be all you need
Electric Drill and Drill Bits - Electric drills are by far the first power tool purchased, they have so many uses besides drilling holes, there are attachments to turn them into paint mixers, sanders, screwdrivers, saws, grinders, lathes, the list goes on.

There are corded and cordless drills, so far each have their place. I would recommend starting with a 3/8" capacity, variable speed, reversible corded drill, it will not be as handy as a cordless but you will get good performance for a low price.

Choose a slower speed model, (max. 1200 rpm), they seem to have more torque for drilling larger holes yet still drill clean smaller holes. Most drills are now double insulated which is a safety factor, if it has a three prong plug use a three prong extension cord.

Electric Circular Saw – These can be very handy when cutting your wood pieces. No need to break the bank on this, however. Find one that’s easy for you to use and reliable.

Jig Saw – While not completely necessary, a good jig saw can help make your woodworking projects easier. They can add some eye-catching detail to a piece and make cutting wood easier as well.

Router - Routers have become one of the most used tools in a workshop, possibly even more popular than a table saw. A well equipped shop will have both a plunge base and a fixed base router; it is now possible to get a combination kit where one machine has both bases.

There are many different bit profiles available, probably a straight bit and a round over bit are the first ones you will need, but this depends on the type of projects you will be doing. It is much easier to work with smaller pieces if the
router is mounted on a table. Generally much better results are achieved by taking several passes making a shallow cuts rather than one pass if a lot of material has to be removed.

Glue – You’ll want some strong carpenter’s wood glue on hand to insure your piece’s stability.

Carpenter's Pencil - Rectangular shaped pencil, about 1/4" X 1/2", with a 1/16" X 3/16" lead.

Keep safety glasses at hand, even if you aren’t using power tools in your wood shop. When using a hammer or moving boards, objects or wood shavings can fly up quickly, putting you at risk of injury.

A basic first aid kit should also be readily available for shop accidents, though you can greatly reduce your risk of wood shop accidents by always using your hand tools as they are intended. Using the right tool for the job saves wear and tear on the tools and on you.

Finally, keep a wet / dry shop vacuum nearby so that you can quickly clean up wood shavings and dust. Keeping dust and wood particles to a minimum will reduce the risk of wood shop fires and help you breathe easier, too.

We’ll assume you have a basic knowledge in using a hammer and screwdriver. If you will be using power tools,just rely on the instruction guide that will come with it if you buy it new. If you don’t buy it new, enlist the help of a family member or friend to show you. A last ditch resort is to check the Internet or get a book from your local library.

Using tools isn’t rocket science. They’re pretty easy to figure out if you take the time. Just remember to be careful and practice safe use.

What do you need to know about using mechanical tools? Read on!

Safety In The Shop - What You Ought To Know About It

When you are working around sharp saws, machinery that can sever a limb, and heavy boards, it’s important to be safe and avoid any mistakes that could endanger your health and even your life!


Safety glasses or goggles should be worn whenever power tools are in use and when chiseling, sanding, scraping or hammering overhead. This is very important for anyone wearing contact lenses. Wear ear protectors when using noisy power tools. Some tools operate at noise levels that damage hearing.

Be careful of loose hair and clothing so that it does not get caught in tools; roll your sleeves up and remove jewelry. Keep tools out of the reach of small children. The proper respirator or face mask should be worn when sanding, sawing or using substances with toxic fumes. Oily rags are spontaneously combustible, so take care when you store and discard them.

Keep blades sharp. A dull blade requires excessive force and can slip which causes accidents. Always use the right tool for the job. Repair or discard tools with cracks in the wooden handles or chips in the metal parts.

Don't drill, shape or saw anything that isn't firmly secured. Don't abuse your tools.

Do not work with tools when you are tired. That's when most accidents occur. Do not work with tools when you have been using alcohol. Alcohol can skew your judgment. 
Wait to celebrate after you’ve finished your project! Do not smoke around flammable product like stains and solvents. Read the owner's manual for all tools and under- stand their proper usage. Unplug all power tools when changing settings or parts.

Take special care regarding the use of the table saw fence settings and the suggestions on how to make cuts using safety guards, push sticks, push blocks, fence straddlers, and feather boards.

The most powerful tool in your shop is your brain, use it. Thinking your cuts and movements through before acting can help save both fingers and scrap wood. Pay attention to your actions. Looking up to watch the shop TV or visitor can result in your hand contacting the blade. Always wait until you have completed your cut before you take your eyes off the blade.

Keep in mind that this is just a hobby and take a break when you feel rushed or frustrated with a project. Mistakes happen when we rush to complete a job. 
If your saw is resisting the cut, stop and see what’s wrong. A misaligned rip fence or improperly seated throat plate can sometimes cause a board to get stuck in mid cut. Forcing the board in these situations may cause kickback or contact with the blade. Take a moment to evaluate the situation and
determine the problem.

Let the tool stop running. Giving the power tool time to wind down after a cut is an often-overlooked safety mistake. Even without power, the spinning blade can still do a lot of damage.

Accidents are caused by inattention, taking chances,bad judgment, fatigue, and horseplay. Other causes are poor instruction (not reading manuals), missing guards,unsuitable clothing, defective equipment, insufficient working space and poor lighting.

A huge step in preventing personal injury is to familiarize yourself with any new tool before using it, read the manual, do a dry run with the machine unplugged. Only use a tool or machine for its intended purpose. If it is a two person job don't try to do it alone, wait until assistance is available.

Keep a clean shop. A cluttered shop is an accident waiting to happen. Keeping your shop clean will help protect you, and your tools, from tripping hazards. Designate where hand tools are stored, sort nails, screws, and other hardware
in containers. Sweep up at the end of the day. Solvent fumes and airborne dust can present health and explosion hazards. Care should be taken to ensure a supply of fresh air and use only explosion proof vent fans.

Just as there are safety procedures you should follow, it helps if you are aware of the most common mistakes newbies make when beginning their wood projects.

Easy Woodworking Projects For Beginners

So you’re thinking you want to learn woodworking?

Woodworking can be a fun and satisfying hobby, but it can also be quite frustrating. In a world filled with mass produced,poorly crafted pieces of furniture, it can be a thrill to produce a piece made with your own two hands.

Take a few pieces of wood, some tools, and your imagination, and you can make beautiful pieces of furniture.The possibilities with carpentry are endless. Even the most inexperienced person can learn woodworking and turn out gorgeous pieces that can become heirlooms.

Woodworking as a hobby is growing in popularity –especially among the female population. More and more women are taking a new interest in jig saws and power drills as they turn out accessories and furniture for their homes.

The term “woodworking” literally refers to the process of building, making or carving something using wood. Kind of obvious, isn’t it? But there are all types of pieces that can be made using wood – not just furniture! You can make toys, toy boxes, or carved figurines.It can truly become an art form.So where and how does an aspiring woodworker begin?Many people benefit greatly from taking a class at the local college or community center. Others prefer to read a book or magazine. Still others prefer to just jump right in.

There’s no one right way to start. It depends on how much experience you have with using the tools essential to woodworking.Woodworking is not nearly as daunting as it may seem.It is not necessary to spend a fortune on tools and supplies.Many projects can be done with a minimum investment and your imagination!

Woodworking is a huge hobby, with the number of active participants estimated by some within the industry at between seven and eleven million strong. Each brings their own set of capabilities and interests that often make specific techniques more applicable in their situation. As long as the techniques chosen are safe, and produce the desired results,they are right for them.

In this website, you will learn basic woodworking terms, getting started with a stocked shop,carving out your workspace, and introducing you to some basic woodworking projects. We will concentrate mainly in here on building pieces of furniture. Once you get the hang of this, you can get more in-depth with carving, etc. as you learn to better use your tools.

This is not a comprehensive, definitive guide, but a good way to get started crafting your own projects and learning the satisfaction of making your own furniture, toys, and much more!

We’ve included a section on shop safety, and some easy projects we found to get you started! So let’s start with the newbie’s guide to woodworking!

An Essential Guide To Woodworking Plans


Woodworking plans are an essential component of any project. Wood working patterns and scroll saw patterns are needed to plan a project and create accents in your piece. Good plans give step by step instructions, diagrams and illustrations to guide you through from start to finish. You can buy plans, find them for free on the internet or make your own plan.

Finding Woodworking Plans

Free woodworking patterns can be found on the internet. Many are free, but others need to be purchased. You can search for general plans or for specific projects. Patterns are available for everything from a simple box or bird feeder to elaborate furniture projects. Several websites offer plans for making children’s toys and decorative items. Enter the project you are looking for in your favourite search engine or just enter free woodworking plans.

There are books available that are devoted to wood working patterns. You can find these at book stores, on the internet or in your local library. Often, woodworking magazines will contain plans for a wide variety of projects. Purchase a few of these at your local news stand. After you have found one you like best, you may decide to subscribe and receive new plans month after month.

If you are new to woodworking, it’s best to start of with a simple pattern. This will help you learn to read and follow the plans. As your skills increase, you can move on to more difficult projects. Start off with a simple toy or bird feeder before attempting to make a dining room set. Look for detailed and thorough plans to help you create your project.

Good plans include detailed instructions. The instructions should take you step by step through the entire project. Look for plans that have detailed diagrams as well as illustrations of the project at each stage. Print out your plans and keep them in a binder. This will help keep you organized and prevent pages from getting lost or damaged.

You can follow the plan step by step or you may decide to make a few changes to the plan. Changing a few details is a great way to make a generic plan more personal and original. For example, you can change certain designs or accent pieces and give the project a whole new look. Another option is to paint the finished product, rather than staining.

Creating Woodworking Plans

Once you become more experienced, you may decide to try to create your own plan. Start by sketching how you want the finished product to look. The first sketch doesn’t need to be too technical or detailed. You will add the details and dimensions later. Once you have made your original sketch, determine the dimensions of the total finished product.

Determine what type of wood you will use in your project and how much wood you will need. It’s important to use accurate measurements when ordering the wood to avoid running out before the project is finished. Determine what other materials you will need to complete the project. This will help you estimate the total cost.

Create a detailed list of all materials needed and the quantity of each material. Include items such as paint, stain or polyurethane. Consider the tools that will be needed to complete the project. Do you have all that you need? With this information, you can then determine the overall cost. Take this list with you when you go out to purchase supplies.

You will then draw a more detailed sketch of your design. Create diagrams like those found in woodworking plans on the internet. Draw each stage of the process in detail. Write out detailed instructions that will take you step by step through the project. This will help you stay organized and ensure that you don’t skip any essential steps along the way.